产品介绍９/div>
产品说明
一般描?/p>
The MQuant?Chlorine test (formally MColortest?) can be used for the determination of free and total chlorine using liquid reagents.
The test can be used in
- Groundwater and surface water
- Drinking water and mineral water
- Waters from aquaculture
- Wastewater
- Electroplating wastewater
- Disinfectant solutions
This test is not suited for seawater.
Method
In weakly acidic solution free chlorine reacts with diethyl-p-phenylenediamine (DPD) to form a red-violet dye. In the presence of potassium iodide, also combined chlorine is measured in this reaction. The chlorine concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color disk.
The test evaluates the color reaction based on the transmitted light method. So even turbid and colored water samples can be analyzed without further preparation.
The color disk is made of very durable, lightfast plastic, thus suitable for industrial areas and wet environments.
Using the refill pack 1.14979 containing all the reagents, the original test kit can be used for a very long time, making it a particularly economical and ecological system.
(free chlorine) with liquid reagent Method: colorimetric, DPD, with color-disk comparator 0.1-0.2-0.3-0.4-0.6-0.8-1.0-1.5-2.0 mg/l Cl? MQuant
?
The liquid reagent can be used for the determination of free chlorine with the MQuant
?Chlorine test. The chlorine concentration can be measured semiquantitatively by visual comparison of the colour of the measurement solution with the colour fields of the color disk.
法律信息
MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany
产品性质
| 质量水平 |
100 |
| specific analyte(s) |
chlorine |
| measuring range |
0.1-2.0 mg/L (Cl2) |
| 相容?/td> |
for use with MQUANT? |
| detection method |
colorimetric |
| 储存温度 |
15-25ℂ/td> |
m.cnreagent.com
