产品名称９/div>
Polygard
?CN Cartridge Filter
Polygard-CN Cartridge Filter 10 in. 2.5 μm Code 0 PTFE-encapsulated Fluoroelastomer
Polygard-CN 筒式过滤 10 in.2.5 μm 0 PTFE 包覆氟橡胵br />
产品介绍９/div>
产品说明
一般描?/p>
Device Configuration: Cartridge
制备说明
Sterilization Method
10 autoclave cycles or SIP @ 126 C for 30 min
Sanitization Protocol
30 min with hot water @ 80 C
分析说明
Will meet the USP Oxidizable Substances Test requirements after a water flush of 5 L
Gravimetric Extractables: after 24-h soak in water
其他说明
Directions for Use
- Organism Retention: Microorganism reduction
- Mode of Action: Filtration (nominal)
- Application: BioProcessing
- Intended Use: Efficient particle and microorganism reduction
- Instructions for Use: Please refer to the Polygard?and CLARIGARD?Cartridges user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
法律信息
CLARIGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
POLYGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
基本信息
产品性质
| 质量水平 |
400 |
| 物料 |
PTFE seal
polypropylene |
| 特点 |
hydrophilic |
| manufacturer/tradename |
Polygard
|
| 参数 |
4.8 bar max. differential pressure (70 psid) at 25 ℂbr />4.8 bar max. inlet pressure (70 psi) at 25 ℂ/td> |
| cartridge nominal length |
10 in. (25 cm) |
| 直径 |
7.0 cm (2.75 in.) |
| 过滤面积 |
0.42 m2 |
| 杂质 |
0.5 EU/mL bacterial endotoxins (LAL test, Aqueous extraction) |
| gravimetric extractables |
50 mg |
| 孔径 |
30.0 m nominal pore size
30.0 m pore size |
| input |
sample type liquid |
| cartridge code |
Code 0 (2-222; O-rings) |
m.cnreagent.com
