Carbolite^?wire wound single zone tube furnace

NB.24

Heat up time 25 mins.
Flexible, cost effective precision furnaces. These models utilize a resistance wire heating element which is wound around the outside of a ceramic work tube making it an integral part of the heating element.

If the tube is required to contain an atmosphere or is likely to be contaminated by spillage, an additional work tube should be used.

The thermocouple is located in a protective position between the outside of the work tube and the heating element, allowing the full work tube diameter to be used and protect the thermocouple from mechanical damage.

• Fixed element tube mounted horizontally on a control box
• Tube furnace comes with Model 301 setpoint controller

For safety reasons furnaces supplied with cable connection for hard wire only.

Carbolite is a registered trademark of Carbolite Limited

230 V (AC)

CE compliant
thermocouple type N

MTF 12/38/250
Carbolite M1238-250-230SN

1200 ℃ max. temp.

300 mm

38 mm (1.5 in.)

15 kg