The support for this foil cannot be removed without destroying the foil itself.

订货叶�/strong>	包装规格
Sizes
877-426-59	25mm x 25mm
337-895-50	50mm x 50mm

产品参数

Purity[纯度]	99.85%
Support[载体]	0.125 mm Permanent Polyester
Thickness[厚度]	0.001mm
Typical Analysis(典型分析)
Ag	1 PPM
Al	40 PPM
Au	35 PPM
Ba	5 PPM
Bi	8 PPM
Ca	100 PPM
Cr	25 PPM
Cu	100 PPM
Fe	60 PPM
Mg	6 PPM
Mn	7 PPM
Ni	150 PPM
Pb	20 PPM
Pd	40 PPM
Pt	150 PPM
Ru	40 PPM
Si	500 PPM
Sn	1 PPM
Ti	3 PPM
Mechanical Properties(机械性能)
Bulk modulus ( GPa ) ( Hard )	276.0
Bulk modulus ( GPa ) ( Soft )	276.0
Hardness - Vickers ( kgf mm?? ) ( Hard )	300
Hardness - Vickers ( kgf mm?? ) ( Soft )	120
Material condition	Hard
Material condition	Soft
Poisson's ratio ( Hard )	0.260
Poisson's ratio ( Soft )	0.260
Tensile modulus ( GPa ) ( Hard )	379.00
Tensile modulus ( GPa ) ( Soft )	379.00
Tensile strength ( MPa ) ( Hard )	1380.00 - 2070.00
Tensile strength ( MPa ) ( Soft )	690.00 - 760.00
Yield strength ( MPa ) ( Soft )	69.0 - 275.0
Electrical Properties(电气特�?
Electrical resistivity ( μOhmcm )	4.7@20ℂ�/td>
Temperature coefficient ( K?? )	0.00440 @0-100ℂ�/td>
Thermal emf against Pt (cold 0C - hot 100C) ( mV )	0.70
Thermal Properties(热性能)
Coefficient of thermal expansion ( x10?? K?? )	8.500 @0-100ℂ�/td>
Latent heat of evaporation ( J g?? )	4800
Latent heat of fusion ( J g?? )	210.00
Melting point ( C )	1965.00
Specific heat ( J K?? kg?? )	244.0 @25ℂ�/td>
Thermal conductivity ( W m?? K?? )	150.00 @0-100ℂ�/td>
Atomic Properties(原子属�?
Atomic number	45
Atomic weight ( amu )	102.90550
Crystal structure	Face Centred Cubic
Electronic structure	Kr4d?5s?
Ionisation potential ( No./eV )	1 / 7.46
Ionisation potential ( No./eV )	3 / 31.1
Ionisation potential ( No./eV )	2 / 18.1
Photo-electric work function ( eV )	4.60
Thermal neutron absorption cross-section ( Barns )	150.0000
Valences shown	2 ,3,4,5,6
Physical Properties(物理性质)
Boiling point ( C )	3727
Density ( g cm?? )	12.400 @20ℂ�/td>

其他参数

公差

长度	<100mm	��1mm
	�?00mm	+2% / -1%
直径	<100mm	��1mm
	�?00mm	+2% / -1%
厚度	<0.01mm	��25%
	�?.05mm	��15%
	>0.05mm	��10%
长度 1	<100mm	��1mm
	�?00mm	+2% / -1%
长度 2	<100mm	��1mm
	�?00mm	+2% / -1%